Proprietary Greentech
Fuel Enhancing Technology
A patented, passive fuel enhancer that sits in the fuel tank. It helps the fuel atomize finer and burn more completely. No additives, no electronics, no engine changes.
- US 11,713,737 B1US invention patent
- 15independent testing bodies
- 58,000+serial-numbered units shipped
- 20 yearsof test records, published in full
It works on the fuel — before the engine ever sees it
One fuel, three places. Nothing is added to the fuel, and nothing on the engine is changed.
In the tank
The enhancer sits fully immersed in the fuel. No wiring, no power, nothing to adjust.
At the injector
The fuel atomizes finer, so more of it meets oxygen.
In the cylinder
More of every drop burns. You get more work from each liter and less CO and HC at the tailpipe.
Coarse drops leave fuel unburned. A finer spray burns more completely.
- Fuel molecules cling together in clusters
- Coarser droplets leave the nozzle
- Part of each drop leaves unburned — as CO, HC, smoke and carbon deposits
- The fuel reaches the injector more dispersed
- A finer spray mixes with more air
- A more complete burn: more energy per liter, lower CO and HC
Why finer matters
Split one drop into eight drops of half the size. The same fuel now has twice the surface touching oxygen. Fuel evaporates and burns from the surface of each drop.
Illustration, not to scale. The lab and emission measurements behind each step are below.
See how it works — and how it goes in
Start hereHow a fuel saver actually worksAnimated explainer · 3:15
Installing it, step by step2:38
Installed to a Freightliner truckVietnam · 0:19Every step is measured — and every report is open
Measured by government inspection centers, international testing companies and universities. Tap any report to see the original.
The fuel behaves differently — and stays in spec
Lab fuel analysis · 2007 / 2010Viscosity ↓Lower from 30 minutes after contact, and still lower after 37 days, at room temperature and at 0 °C. The 2010 test compared both generations. Today's second-generation Greentech did better. An FTIR spectrum (2007) recorded the change at the molecular level.Read about the study →
PDFVietnam Energy Inspection (EIC) · 202025 / 25fuel-quality tests showed no significant change. RON 95.1 → 95.1, vapor pressure 62.7 → 62.7 kPa. Nothing is added. The fuel stays in spec.Open the original report ↗The burn less is left unburned
PDFCan Tho Vehicle Inspection Center · Vietnam government · 2025CO −93.6%Official idle test on a motorcycle.Open the original report ↗
PDFKSRTC · Karnataka state bus corporation, India9 of 10 busesBlack-smoke opacity down 25–85%, recorded by Veritas Enterprises.Open the fleet records ↗Also: Orbital, Australia (DOTARS-registered test facility), 2007, first generation — HC −33.3%, NOx −28.6%, CO −8.7%. Details →
The power more push from the same pedal
On a race track: a 330 bhp Subaru Impreza STI lapped 1.6 s faster (1:15.8 → 1:14.2) — our Cyprus distributor's team, 2014. Race-day report ↗
The fuel bill less fuel for the same work
PDFBureau Veritas · Ethiopia · 2023+17.0%km per liter for a gasoline car on a 148 km test route. A pickup installed in 2022 was still going 13.4% farther per liter a year later.Open the original report ↗
PDFMGA Research · SAE J1321 · USA · 20061st generation+5.93%The SAE industry procedure: a test car and a control car run together, so weather and traffic cancel out.Open the original report ↗Ethiopian government test (ECAE, 2022): same distance, 17.95% less gasoline and 33.6% less diesel — report ↗. In daily fleet use: typically 5–25% — e.g. IFFCO (UAE), six heavy trucks, 7.4% less diesel on average, Savex-measured — fleet report ↗. Each % is worked out against that vehicle’s own original fuel use, so the same fuel saved can show as a different percentage on different vehicles.
Each result compares the same vehicle before and after installing, in the same test. Results are not averaged or compared across tests. The 2006–2009 tests used the first-generation product (Moletech). Today's Greentech is the improved second generation. Results vary by engine condition and operating environment.
Passive, physical, nothing to maintain

- Not an additive
Nothing dissolves into the fuel; its specification stays the same.
- Not electronic
No battery, no wiring, no power supply.
- No engine changes
No ECU tuning, no parts replaced; the engine stays as built.
- Nothing used up
Passive and not consumed. Designed for 10+ years of service.
- Any climate
Measured in the lab at 0 °C; in daily use from the Gulf to Southeast Asia.
- Common fuels
Gasoline, diesel, LPG and CNG — vehicles, generators, machinery, vessels.
Twenty years, two generations, patented
- 2005
Moletech begins in Taiwan: the first-generation technology
- 2006–09
First generation tested by MGA (SAE J1321), CEE, ITRI, TÜV, SGS, Orbital and Hong Kong PolyU
- 2020
Fuel quality checked by EIC, Vietnam; Grab motorcycle fleet, Vietnam
- 2022–23
Government and Bureau Veritas tests in Ethiopia · US invention patent 11,713,737 B1
- 2025
Official emission test in Can Tho, Vietnam: motorcycle CO −93.6%
- 2026
Industrial gas burners in India · Vietnam invention patent No. 55934
Gold: first generation (Moletech). Green: today's Greentech, the improved second generation.
Patent and design protection in multiple countries and regions
See all certificates →Every unit carries its own serial number. Verify a serial number →
What buyers ask us most
Does Greentech change my fuel?
No additive goes into the fuel. Vietnam Energy Inspection (EIC) tested RON 95 gasoline before and after. All 25 fuel-quality tests showed no significant change (RON 95.1 → 95.1). What changes is how the fuel behaves at the injector: it atomizes finer and burns more completely.
Where does it go, and how is it installed?
Inside the fuel tank, fully immersed in fuel. Motorcycles, buses, trucks, boats, and generators: drop it in through the filler. Passenger cars: installed at a repair shop, because on a regular car it won't fit through the filler. The shop drains the tank, then places the enhancer through the fuel-pump opening or where the filler pipe meets the tank. Labor costs vary, so ask the shop first. LPG/CNG: a module on the gas line. Ships: one per 10,000 L of tank capacity.
How soon does it work?
It starts working within about 30 minutes: in the laboratory the viscosity change was measured 30 minutes after contact. Let it sit in the tank for about 30 minutes after installing; fuel readings are accurate once the untreated fuel already in the fuel lines has run through. To measure it, compare before and after with conditions kept as constant as you can (same route, similar load, the same tire pressure and air conditioning), or over months of fleet records — kilometers per liter, or liters per hour for machines. The method is on our fleet quote page.
Is it safe for my engine?
It does not change the engine or its electronics, and the fuel stays in spec. Because combustion becomes more complete, engine output can go up. For marine engines, and for engines that already run close to their rated limit, check with the engine maker before installing.
Why do savings differ from vehicle to vehicle?
The saving comes from fuel that was not burning completely. Older engines, carbon build-up and heavy loads leave more room; a new, well-tuned engine leaves less. How the percentage is calculated matters too — see how savings are calculated.
How long does it last?
It is passive, and nothing gets used up. One unit is designed to last 10+ years.
Explore the technology
The evidence is in. The next step is a quote.
Tell us your vehicles and tank sizes. We pick the right model and send a quote.
Results vary by engine condition and operating environment.

PDF




